Known Issues List
- GEMINI: Startup Error after Deleting Standard Calibration File
- Band/Line on GEMINI at Higher Frame Rates
- RED MINI-MAG Does Not Mount to Camera
- Vertical Lines in Shadows on GEMINI Sensors
- MacOS 10.13.3+ Blocks RED ROCKET-X Driver
- Intermittent Power Issues with Wooden Camera Power Modules and v7.1.0.1
- Sigma Art Lenses Not Recognized
- Sigma 18-35mm f/1.8 DC HSM Art Lens Reports f1.7
- Sigma Lenses for Canon Mounts May Not Be Recognized
- Image Stabilization (IS) May Not Work with Canon Mount Lenses at Startup
- Nikon AF-S NIKKOR E Lenses Not Recognized
- No Power Percentage for Anton Bauer Digital Series Batteries
- RED Touch 5.0" LCD Does Not Initialize Properly on Startup
- W.M.D. EXP Port May Not Power Lens Motors
- W.M.D. Start/Stop Is Disabled when REDLINK Is Selected
- W.M.D. Does Not Trigger Start/Stop with the DSMC2 Jetpack-SDI Expander
- FIZ Motor Calibration List Does Not Update
- Playback Issues with REDCAST Module
- Incorrect Power Info with Movcam Hot Swap Plate
- Reported Issues with Tilta DSMC2 Camera Cages
- Flickering on the 7" RED Touch LCD for DSMC1 (EPIC/SCARLET)
- RED Watchdog Does Not Mount RED Media as Read Only
- RED ROCKET Installation Does Not Complete
- RED Touch 5.0" LCD Does Not Initialize Properly on Startup
- REDCINE-X PRO Look Preset Issue with IPP2
- Sensor Flip Setting Disabled for HELIUM Sensor
- Invalid Voltage Levels Displayed with Anton Bauer CINE 150 Battery
- Power Info Unavailable with Wooden Camera Cable-less Battery Plates and D-Boxes
- Noisy Audio When Powering an External Device via P-Tap
- Diagonal Tear on RED Touch 4.7" LCDs and RED Touch 7.0" LCDs