DSMC2/RANGER - Calibration not finishing


When attempting to do a black shade calibration, the camera may not complete the process and shows an error.

Potential Resolutions

  • Make sure that the sensor is fully covered and no light is getting through. We recommend removing the lens and utilizing the lens mount cap.
  • Delete all previously created calibrations (except for the factory calibration) and create a new calibration.

WARNING: do not do a system restore after deleting all the calibrations without creating a new one.

Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request



Article is closed for comments.