Camera Shutdown on Gimbals Follow

Symptom

When setting up a RED camera on a handheld gimbal system, the camera and gimbal may shut down or brownout during the calibration process. 

Potential Resolution

Update your gimbal firmware and calibrate the gimbal with the camera turned off:

  1. Make sure your gimbal firmware is on the latest version.
  2. Set up your camera on the gimbal.
  3. Balance the camera.
  4. Turn on the gimbal.
  5. Calibrate the gimbal.
  6. Turn on the camera.

If you use the MōVI Pro, go to the Freefly support site for firmware and articles about how to update firmware with Freefly products. Use the latest version of Freefly firmware for bug fixes specific to RED products.

Have more questions? Submit a request

0 Comments

Article is closed for comments.