RED 3-Axis Lens Control System Power Follow

Topics covered on this page:

 

How do I power the W.M.D.?

The W.M.D. is powered by the RED W.M.D. Power Cable 2-PIN 1B to 2-PIN 0B that connects the W.M.D. to a 12 VDC power source, such as the RED Quickplate (Short) Module or REDVOLT XL Module.

 

How do I power the T.H.C.?

 There are two (2) ways to power the RED T.H.C. (Tactical Hand Controller):

For more information, go to the RED 3-Axis Lens Control System Operation Guide.

 

How do I power each lens control motor?

Power the RED Lens Control Motor by connecting the W.M.D. Motor Cable to the W.M.D.

 

How much current does each lens control motor draw?

10 W to 25 W. The motor requires more power to move a stiff lens.

 

What is the RED Li Battery 7.2V run time?

5 hours. The Approximate battery run time is based on a wireless connection to W.M.D.

 

Is the RED Li Battery 7.2V rechargeable?

Yes, you can recharge the RED Li Battery 7.2V with the RED Li Battery 7.2V Charger.

Have more questions? Submit a request

0 Comments

Article is closed for comments.