DSMC2/RANGER - RED MINI-MAG 960GB V3 SSD Firmware Upgrade

NOTE: The RED MINI-MAG 960GB V3 requires that your camera is on firmware v6.3.75 or later.

The RED MINI-MAG 960GB V3 is eligible for an upgrade that optimizes and updates the SSD. To identify if your RED MINI-MAG 960GB is V3 (and therefore eligible for the upgrade), follow the instructions below:

  1. Insert the RED MINI-MAG into the camera.
  2. Go to Menu > Media > Device More Info..., and identify the Model Number. If the SSD model number is "RED 960GB V3", then the SSD is eligible for the firmware upgrade.


Upgrade RED MINI-MAG 960GB Firmware

NOTE: Offload any data from the RED MINI-MAG (SSD) before you upgrade it.

  1. Insert the RED MINI-MAG (SSD) into the camera.
  2. Format the SSD. 
  3. Properly eject the SSD from the camera.
  4. Connect the SSD to your computer.
  5. Download the RED MINI-MAG 960GB V3 firmware (Version 3.01.0, 5/14/2019) here
  6. Unzip the firmware upgrade file.
  7. Copy the .rmf file to the top level of the SSD directory.
  8. Eject or unmount the SSD, and then remove the SSD.
  9. Insert the SSD with .rmf file into your camera.
  10. Go to Menu > Settings > Maintenance > Upgrade > Media
  11. Select Yes and verify that the upgrade completes.
  12. Remove the SSD from the camera when prompted by the on-screen instructions.
  13. Re-insert the SSD into the camera.
  14. Go to Menu > Media > DeviceMore Info..., and verify that the Media Firmware Revision is 0301-000.
  15. Format the RED MINI-MAG before use.


Was this article helpful?
2 out of 3 found this helpful
Have more questions? Submit a request



Article is closed for comments.