Intermittent Camera Shutdown with Wooden Camera D-Box Follow

Known Issue ID: 11709

Issue Summary:

The camera intermittently shuts down during operation or on startup when a Wooden Camera battery module is attached.

Firmware Versions Affected:

-

Fixed in Version:

Workaround:

Limit power consumption of accessories connected to the D-Box to 4A or less for proper operation. The D-Box has x2 P-TAP and x3 LEMO AUX ports that are protected by a 10A fuse. However, the D-Box does not have a current limiter. If the D-Box is overloaded then the camera may detect an under-volt condition, either at startup or as the battery is drained. The under-volt occurs without warning and shuts down the camera.

Have more questions? Submit a request

0 Comments

Article is closed for comments.